Encyclopedia … combined with a great Buyer's Guide !
Encyclopedia > letter Z > zone plates
Zone Plates
Author: the photonics expert Dr. Rüdiger Paschotta
Acronym: FZP
Definition : an optical device for focusing light (or other electromagnetic radiation) based on diffraction
Alternative terms: Fresnel zone plates, operation principle, diffraction, chromatic aberrations
DOI : 10.61835/3kq Cite the article : BibTex plain text HTML Link to this page LinkedIn
A zone plate is an optical device which can be used for focusing light . In contrast to a lens , it is based on diffraction rather than on refraction . It is usually flat (and can thus be considered as an example for flat optics ) and exhibits a radially varying transmissivity :
- The most simply produced (and therefore most frequently used) zone plates are binary zone plates , where the transmissivity at each location can only be either 0 (fully opaque) or some constant value – possibly 1 (fully transparent). For example, one may use a reflecting metal film on a glass surface, which is etched away at suitable positions, using a lithographic technique.
- There are also zone plates with a gradually varying transmissivity (continuous zone plates) – in particular, sinusoidal zone plates .
Zone plates may also be used in reflection rather than in transmission, e.g. when they are realized with reflecting metal films.
Zone plates are sometimes called Fresnel zone plates (FZP), emphasizing the important contributions of Augustin-Jean Fresnel [1] . Another term is diffractive lenses ; zone plates can to some extent be used like lenses, even though their operation principle is completely different.
Zone plates can be regarded as a special kind of diffraction gratings , where one does not have straight grating lines, but rather circular structures.
Example for a Fresnel Lens Design
Considering the simple case where incident light has flat wavefronts (example: a collimated Gaussian beam ), one can design a binary zone plate quite simply: for a given focal length , one can consider the optical phase of light reaching the intended beam focus from a radial position at the zone plate. One chooses full transmission if that optical phase change (modulo ) is between 0 and , for example, and zero transmission otherwise. Essentially, one blocks all those light components which would have “wrong” phase values, thus reducing the total optical intensity . It is also possible to use a different range of phase values, e.g. from to . For good performance, a substantial number of rings should be covered by the input beam profile.
Zone plate designs can also be adjusted to other focusing conditions, e.g. for incident diverging beams.
Figure 1 shows the structure of a zone plate designed for 100 mm focal length for an optical wavelength of 632.8 nm (for light from a helium–neon laser ).
Figure 2 shows how the beam intensity profile evolves when a Gaussian input beam ( = 0.5 mm) is used. One sees the intended beam focus in the middle (for ), and in addition there are intensity maxima at , , etc. That feature is observed for binary zone plates, but is avoided for sinusoidal zone plates.
Zone plates exhibit strong chromatic aberrations – as many other diffractive optical elements do. Figure 3 shows an example for that.
Applications of Zone Plates
For focusing visible and infrared light, one usually prefers ordinary lenses because they offer better performance in various respects. However, their operation principle is hard to utilize in some extreme spectral regions, where most materials exhibit strong absorption . For example, lenses for extreme UV, X-rays and other short-wavelength synchrotron radiation are hard to realize, and Fresnel zone plates can then be a good solution. They may be used not only for focusing radiation, but also for imaging purposes.
There are modified designs of zone plates, e.g. the Zernike zone plate, where a Zernike phase filter is integrated. Such devices are used for phase contrast imaging.
For some applications, one may profit from the possible very flat design of a zone plate. However, there are other types of flat optics realized with photonic metasurfaces .
More to Learn
Encyclopedia articles:
- diffraction
- diffractive optics
- diffraction gratings
- flat optics
Bibliography
(Suggest additional literature!)
Questions and Comments from Users
Here you can submit questions and comments . As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria . Essentially, the issue must be of sufficiently broad interest.
Please do not enter personal data here. (See also our privacy declaration .) If you wish to receive personal feedback or consultancy from the author, please contact him, e.g. via e-mail .
Your question or comment:
Spam check:
(Please enter the sum of thirteen and three in the form of digits!)
By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules . (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.
IMAGES