research study about electricity

Center for Effective Global Action

The Impact of Electricity on Economic Development: A Macroeconomic Perspective

• Stern, David I ;
• Burke, Paul J ;
• Bruns, Stephan B

We find that electricity use and access are strongly correlated with economic development, as theory would suggest. Despite large empirical literatures and suggestive case evidence, there are, however, few methodologically strong studies that establish causal effects on an economy-wide basis. There is some evidence that reliability of electricity supply is important for economic growth. We propose that future research focuses on identifying the causal effects of electricity reliability, infrastructure, and access on economic growth; testing the replicability of the literature; and deepening our theoretical understanding of how lack ofavailability of electricity can be a constraint to growth.

Enter the password to open this PDF file:

Notification: View the latest site access restrictions, updates, and resources related to the coronavirus (COVID-19) »

Electrification Futures Study

Through the Electrification Futures Study (EFS), NREL explored the impacts of widespread electrification in all U.S. economic sectors.

For the multiyear study, NREL and its research partners—Electric Power Research Institute, Evolved Energy Research, Lawrence Berkeley National Laboratory, Northern Arizona University, and Oak Ridge National Laboratory—used  multiple analytic tools and models to develop and assess electrification scenarios designed to quantify potential energy, economic, and environmental impacts to the U.S. power system and broader economy.

Publications

Detailed grid simulations.

Released May 2021, the sixth and final report in the EFS series presents a power system operational analysis of high electrification scenarios. The analysis includes detailed grid simulations of future power systems and electricity demand in the year 2050 developed in earlier EFS reports, particularly the demand- and supply-side scenarios described in the second and fourth reports.

This report also presents an analysis of the potential role and value of flexible load, using assumptions of demand-side flexibility described in Electrification Futures Study: Methodological Approaches for Assessing Long-Term Power System Impacts of End-Use Electrification .

Technical Report: Electrification Futures Study: Operational Analysis of U.S. Power Systems with Increased Electrification and Demand-Side Flexibility

Informational Webinar: Recording  and presentation slides

News Story: Flexible Loads and Renewable Energy Work Together in a Highly Electrified Future

Supply-Side Scenarios

Released January 2021, the fifth report in the EFS series presents analysis on the potential impacts of widespread electrification on the U.S. electricity system—specifically generation and transmission infrastructure investments, fuel use, system costs, and emissions. The report focuses on supply-side scenarios encompassing a wide range of future conditions under electrification levels developed in the second report. A scenario data viewer is available for those who want to take a deeper dive.

Technical Report: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States

Informational Webinar: Recording and presentation slides  

Data: Report figure data

Journal Article: High Electrification Futures: Impacts to the U.S. Bulk Power System

News Story: Latest Electrification Futures Study Report Explores How U.S. Power System Could Evolve With Widespread Electrification

Methods for Supply-Side Scenarios

Released in July 2020, the fourth report in the EFS series provides detailed descriptions of the methodologies used to represent interactions between electricity supply and demand under widespread electrification in power system planning models. The report focuses on major improvements to NREL’s Regional Energy Deployment System (ReEDS) model , a publicly available capacity expansion model that simulates the evolution of the U.S. electricity system through 2050.

Technical Report: Electrification Futures Study: Methodological Approaches for Assessing Long-Term Power System Impacts of End-Use Electrification

Data: Hourly load profiles  and hourly flexible load profiles

Demand-Side Grid Model for Electricity Consumption

Released August 2018, the third report in the EFS series details dsgrid , a new model developed for the EFS and in recognition of a general need for a more detailed understanding of electricity load. dsgrid utilizes a suite of bottom-up engineering models across all major sectors to develop hourly electricity consumption profiles for every county in the contiguous United States. 

Webpage:  dsgrid: Demand-Side Grid Model

Technical Report:  The Demand-Side Grid (dsgrid) Model Documentation

Presentation:  The demand-side grid (dsgrid) model

Data: Hourly electricity consumption profiles for 2012 

Demand-Side Scenarios

Released June 2018, the second report in the EFS series aims to support an integrated understanding of how the potential for electrification might impact the demand side of the U.S. energy system. The report presents scenarios with various degrees of future electrification in all major end-use sectors of the U.S. energy system and quantifies impacts on the amount and shape of electricity demand.

Technical Report:  Electrification Futures Study: Scenarios of Electric Technology Adoption and Power Consumption for the United States

Informational Webinar:  Recording and presentation slides

Industrial Sector Presentation:  Electrification of Industry: Summary of EFS Industrial Sector Analysis

Data: Report figure data  and  annual scenario data

News Story: NREL Analysis Explores Demand-Side Impacts of a Highly Electrified Future

Foundational Technology Cost and Performance Data

Released December 2017, the first report in the EFS series provides estimated cost and performance data for electric technologies considered in the study. The study applies a literature- and expert opinion-based approach in developing future projections of technology advancement to be used in the EFS scenario analysis. The data can also inform other researchers and analysts exploring electrification.

Technical Report:  Electrification Futures Study: End-Use Electric Technology Cost and Performance Projections through 2050

Data:   Report figure data and cost and performance data

News Story: NREL Launches Electrification Futures Study Series

Electrification Futures Study in the News

Report Explores How U.S. Power System Could Evolve with Widespread Electrification , T&D World (January 2021)

Five Takeaways from a New NREL Report on Electrification's Futures , PV Magazine (January 2021)

Electrification of HVAC Regionally Gains Ground , Air Conditioning, Cooling, Heating, and Refrigeration (ACHR) News  (April 2020)

How Might Electrification Affect Electric and Gas Systems? Recent Studies Shed Both Light and Heat , American Council for an Energy-Efficient Economy (ACEEE) Blog  (September 2018)

EVs Could Drive 38% Rise in U.S. Electricity Demand, DOE Lab Finds , Utility Dive  (July 2018)

‘Electrification of Everything’ Would Spike US Electricity Use, but Lower Final Energy Consumption , Greentech Media  (July 2018)

What Does the ‘Electrification of Everything’ Look Like in America? NREL Plans to Find Out , Greentech Media  (January 2018)

Other NREL Reports on Electrification

Electrification Opportunities in the Transportation Sector and Impact of Residential Charging

An Electrified Future: Initial Scenarios and Future Research for U.S. Energy and Electricity Systems

Electrification and Decarbonization: Exploring U.S. Energy Use and Greenhouse Gas Emissions in Scenarios with Widespread Electrification and Power Sector Decarbonization

National Economic Value Assessment of Plug-in Electric Vehicles

Emissions Associated with Electric Vehicle Charging: Impact of Electricity Generation Mix, Charging Infrastructure Availability, and Vehicle Type

Generation and Use of Thermal Energy in the U.S. Industrial Sector and Opportunities to Reduce its Carbon Emissions

Impact of Uncoordinated Plug-in Electric Vehicle Charging on Residential Power Demand

Energy Analysis Delivered to Your Inbox

Your personal data will only be used for as long as you are subscribed. For more information, review the  NREL security and privacy policy .

How plants can generate electricity to power LED light bulbs

Sustainable energy sources, which are pollution free and environmentally friendly, are one of the key challenges of world's future society. The interdisciplinary team of roboticists and biologists at IIT-Istituto Italiano di Tecnologia in Pontedera (Pisa, Italy), found that living plants can help with electricity. Fabian Meder, Barbara Mazzolai and their coworkers at IIT discovered that living plants are literally "green" power source, which may become one of future's electricity supplies that perfectly integrates in natural environments and is accessible all over the world. Researchers discovered that plants can generate, by a single leaf, more than 150 Volts, enough to simultaneously power 100 LED light bulbs. Researchers also showed that an "hybrid tree" made of natural and artificial leaves can act as an innovative "green" electrical generator converting wind into electricity.

Results are published on Advanced Functional Materials .

The research team is based at Center for Micro-Bio Robotics (CMBR) of IIT in Pontedera (Pisa, Italy), coordinated by Barbara Mazzolai, and their goal is to perform advanced research and to develop innovative methodologies, robotic technologies and new materials, inspired by the natural world. Bio-inspired approaches can therefore help to develop robots and technologies that are more suitable for unstructured environments than today's solutions. In 2012 Barbara Mazzolai coordinated the EU funded project Plantoid, which brought to the realization of the first plant robot in the world. In this last study, the research team studied plants and showed that leaves can create electricity when they are touched by a distinct material or by the wind.

Certain leaf structures are capable to convert mechanical forces applied at the leaf surface into electrical energy, because of the specific composition that most plant leaves naturally provide. In detail, the leaf is able to gather electric charges on its surface due to a process called contact electrification. These charges are then immediately transmitted into the inner plant tissue. The plant tissue acts similar to a "cable" and transports the generated electricity to other parts of the plant. Hence, by simply connecting a "plug" to the plant stem, the electricity generated can be harvested and used to power electronic devices. IIT's researchers show that the voltage generated by a single leaf may reach to more than 150 Volts, enough to simultaneously power 100 LED light bulbs each time the leaf is touched.

In the article, researchers additionally describe for the first time how this effect can be used to convert wind into electricity by plants. Therefore, researchers modified a Nerum oleander tree with artificial leaves that touch the natural N. oleander leaves. When wind blows into the plant and moves the leaves, the "hybrid tree" produces electricity. The electricity generated increases the more leaves are touched. Consequently, it can be easily up-scaled by exploiting the whole surface of the foliage of a tree or even a forest.

The study is a first essential step for a new project that Barbara Mazzolai will coordinate in 2019, the European-funded project Growbot whose aim is to realize bioinspired robots that implement plant-like growing motions. The new robots will be then partly powered by the new plant-derived energy source, showing that plants may become one of future's electricity supplies, accessible all over the world.

• Endangered Plants
• Electricity
• Energy Technology
• Wind Energy
• Energy and Resources
• Power station
• Electricity generation
• Wind turbine
• Electric power transmission
• Hydroelectricity
• Electrical engineering

Story Source:

Materials provided by Istituto Italiano di Tecnologia - IIT . Note: Content may be edited for style and length.

Journal Reference :

• Fabian Meder, Indrek Must, Ali Sadeghi, Alessio Mondini, Carlo Filippeschi, Lucia Beccai, Virgilio Mattoli, Pasqualantonio Pingue, Barbara Mazzolai. Energy Conversion at the Cuticle of Living Plants . Advanced Functional Materials , 2018; 1806689 DOI: 10.1002/adfm.201806689

Cite This Page :

Explore More

• U.S. Life Expectancy Increases to Stall
• Bird-Inspired Drone Can Jump for Take-Off
• How Ancient Indigenous Peoples Used the Land
• Mysteries of a Blue Low-Latitude Aurora
• Chimps Use Tools in Flexible, Highly Complex Way
• 'Zip Code' Draws Killer T Cells to Brain Tumors
• Cause of Global Warming Surge: Change in Clouds
• Why We're Here
• Hummingbirds Evolved Surprisingly Flexible Bills
• Pregnancy, Nursing: 2X Intestinal Surface Area

Trending Topics

Strange & offbeat.

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• My Account Login
• Explore content
• About the journal
• Publish with us
• Sign up for alerts
• Open access
• Published: 22 October 2021

Geophysical constraints on the reliability of solar and wind power worldwide

• Dan Tong   ORCID: orcid.org/0000-0003-3787-0707 1 , 2 , 3 ,
• David J. Farnham   ORCID: orcid.org/0000-0002-6690-4251 3 ,
• Lei Duan   ORCID: orcid.org/0000-0002-6540-1847 3 ,
• Qiang Zhang   ORCID: orcid.org/0000-0002-8376-131X 1 ,
• Nathan S. Lewis 3 , 4 ,
• Ken Caldeira   ORCID: orcid.org/0000-0002-4591-643X 3 , 5 &
• Steven J. Davis   ORCID: orcid.org/0000-0002-9338-0844 2 , 3 , 6  

Nature Communications volume  12 , Article number:  6146 ( 2021 ) Cite this article

57k Accesses

129 Citations

561 Altmetric

Metrics details

• Climate change
• Climate-change mitigation
• Renewable energy

If future net-zero emissions energy systems rely heavily on solar and wind resources, spatial and temporal mismatches between resource availability and electricity demand may challenge system reliability. Using 39 years of hourly reanalysis data (1980–2018), we analyze the ability of solar and wind resources to meet electricity demand in 42 countries, varying the hypothetical scale and mix of renewable generation as well as energy storage capacity. Assuming perfect transmission and annual generation equal to annual demand, but no energy storage, we find the most reliable renewable electricity systems are wind-heavy and satisfy countries’ electricity demand in 72–91% of hours (83–94% by adding 12 h of storage). Yet even in systems which meet >90% of demand, hundreds of hours of unmet demand may occur annually. Our analysis helps quantify the power, energy, and utilization rates of additional energy storage, demand management, or curtailment, as well as the benefits of regional aggregation.

Similar content being viewed by others

A Multi-Decadal Hourly Coincident Wind and Solar Power Production Dataset for the Contiguous United States

Spatiotemporal management of solar, wind and hydropower across continental Europe

Renewable energy quality trilemma and coincident wind and solar droughts

Introduction.

Stabilizing mean global temperatures requires a global transition to energy systems with near-zero (or net-negative) carbon dioxide equivalent emissions 1 , 2 , 3 . In cost-optimized scenarios that accomplish this transition, solar and wind resources often supply a large share (e.g., >60%) of electricity 4 , 5 , 6 , 7 , 8 , 9 , 10 . Designing and operating a highly reliable electricity system that is dependent on such large shares of wind and solar generation can be a challenge, however, due to the variable and uncertain nature of solar and wind resources 11 , 12 . The efficacy of meeting electricity demands with generation from solar and wind resources depends on factors such as location and weather; the area over which generating assets are distributed; the mix and magnitude of solar and wind generation capacities; the availability of energy storage; and firm generation capacity 11 , 12 , 13 , 14 , 15 , 16 . Meanwhile, reliability standards in industrialized countries are typically very high (e.g., targeting <2–3 h of unplanned outages per year, or ~99.97% 17 ). Resource adequacy planning standards for “1-in-10” are also high: in North America (BAL-502-RF-03) 18 , generating resources must be adequate to provide no more than 1 day of unmet electricity demand—or in some cases 1 loss of load event—in 10 years (i.e., 99.97% or 99.99%, respectively) 19 .

Here, we present a systematic analysis of the ability of specified amounts of solar and wind generation to meet electricity demands in 42 major countries across a range of assumptions associated with transmission, energy storage, and generation amounts. In particular, we assess spatial and temporal gaps between electricity demand and the availability of solar and wind resources, which represent gaps that must be filled by other non-emitting generation technologies or operating strategies in reliable electricity systems based on zero-carbon sources. The complementarity of renewable energy sources for this study is defined as a hybridization of solar-wind resources over a given area (here, countries), which we estimate by the Kendall correlation coefficient of these resources across 39-years of resource data 20 . Our goal is to identify the opportunities, complementarity, and challenges of variable renewable resources in greater detail than can be done by integrated assessment models that have multi-year time steps. Our results do not account for realistic power system specifications. Rather, we examine fundamental geophysical constraints on wind- and solar-dominated power systems independent of cost estimates. Note that we do not mean to suggest that the temporal variability of such resources would ever make it physically impossible to meet a given electricity demand (with enough capacity the solar and wind resources would be able to meet demand), but rather the extent to which such variability may determine the economic or socio-political feasibility of reliable systems. Our results will thus continue to be informative even as technological and socio-political feasibility evolves.

Details of our analytical approach are in the “Methods” section. In summary, we use 39 years (1980–2018) of gridded (0.5° × 0.625°) and hourly reanalysis data 21 , 22 and actual/projected hourly electricity demand from a single recent year to evaluate the adequacy of solar and wind resources to meet electricity demand in each of 42 major countries (data sources and countries are listed in Supplementary Data  1 ). First, hourly, area-weighted capacity factors for both solar and wind resources are calculated over each country (or region), assuming perfect transmission within the country or region. Then we exogenously specify (1) the mix of solar and wind generation, (2) the overall level of annual generation from these sources, and (3) the capacity of energy storage, and analyze the ability of the specified technologies to meet hourly demand. We analyze systems ranging from 100% solar (no wind) to 100% wind (no solar), in which total annual generation ranges from equal to annual demand (“1x generation”) to up to three times annual demand (“3x generation”), and in which available energy storage ranges from none (“0 h”) to 12 h of mean demand (“12 h”). In addition, we simulate the impacts of different demands (i.e., demand load profiles) and technologies (i.e., single-axis and dual-axis solar tracking systems) on electricity system reliabilities as sensitivity tests. The number of countries, years of reanalysis data, and different system configurations we analyze require computation and analysis of ~300,000 year-long simulations.

Resources and demand variability

Figure  1 shows the seasonal and daily variability of solar and wind resources and electricity demand in the six countries with the greatest electricity demand on every continents except Antarctica (results from six other major countries and continent-level aggregated regions are shown in Supplementary Figs.  1 and 2 , respectively). Solar and wind consistently peak in summer and winter, respectively, in countries of the Northern Hemisphere (seasons are reversed in countries of the Southern Hemisphere; Fig.  1a–f ). The seasonal cycles of solar and wind thus suggest potential complementarity in many countries (e.g., China, Fig.  1a ; and Germany, Fig.  1b ). However, during the 39-year period, interannual variability of wind is consistently much greater than that of solar in most countries (Fig.  1a–f ), though the magnitude of these resources’ variability differs substantially between two particular countries. For example, Germany’s small area (0.36 million km 2 ) and high latitude (centroid 51.2 °N) result in large interannual variations in both solar (measured by the robust coefficient of variation 23 ; RCoV = 58.8%) and wind resources (RCoV = 47.2%, Fig.  1b ), whereas solar resource variability is very low (RCoV = 6.6%) in the larger and tropical country of Brazil (8.52 million km 2 and centroid 14.2 °S; Fig.  1e ). Wind resources are also more variable than solar resources on the time scale of days to weeks in each country, which acts to limit and undermine the resources’ seasonal complementarity. Electricity demand profiles for each country are determined by factors such as economic conditions, prevailing weather conditions and consumer usage patterns 24 . Therefore, electricity demand for two countries can have unique seasonal shapes and a range of variabilities even if they have similar wind and solar resources. For example, seasonal variability of demand in France (RCoV = 14.4%; Supplementary Fig.  1e ) is greater than that in Germany (RCoV = 7.4%; Fig.  1b ), despite the countries’ similar wind and solar resource profiles.

Climatological variability of the area-weighted median power from solar (orange) and wind (blue) resources for the selected country from six continents during the 39-year period 1980–2018. The countries (from the top row to the bottom row) are China ( a , g , m ), Germany ( b , h , n ), contiguous U.S. ( c , i , o ), South Africa ( d , j , p ), Brazil ( e , k , q ), and Australia ( f , l , r ). The left column ( a – f ) depicts the daily and seasonal variability, the middle column ( g – l ) depicts hourly summer (June, July, and August) variability, and the right column ( m – r ) depicts hourly winter (December, January, and February) variability. The lines represent the median, the dark shading represents the inner 50% of observations (25th to 75th percentile) and the light shading represents the outer 50% of observations (0th to 100th percentile) of the daily averaged value for that same day in each of the 39 years of record. Red curves in each panel represent electricity demand for a single, most recent, available year for each country. The time of day shown is the local time of each country and its relation to Coordinated Universal Time (UTC) is shown. Note that the middle of local time zones has been selected for the countries with multiple time zones. The solar, wind, and demand data are each normalized by dividing by their respective 39-year mean value.

Daily cycles of solar and wind resources in each country are also somewhat complementary. Wind power usually peaks at night and rarely falls to zero when resources are aggregated over an entire country. This daily cycle is not substantially different during the summer and winter months (comparing Fig.  1g–l with Fig.  1m–r ). Thirty-four (of the 42) countries have higher average wind power availability during the nighttime than during the daytime. Solar power peaks in the middle of the day and drops off sharply to zero at dusk. The amplitude and duration of the daily cycles for solar power availability is consistently different during the summer and winter months across countries (Fig.  1g–l versus Fig.  1m–r ). The daily cycle of solar resources is a barrier to realizing reliable solar-dominated electricity systems without energy storage and/or complementary wind generation to meet demand during the hours when the solar resource is not available. In addition, given our assumption of single-axis solar tracking, available solar power tends to be flat for several hours around its daytime peak during the daily cycles (Fig.  1g–r ), though in some countries (e.g., Germany, South Africa, Australia) there is a consistent dip near noon, perhaps related to our adjustments of the direct radiation (details in Supplementary Note  1 ). Kendall’s correlation coefficients of solar and wind resources in the 42 main countries range from −0.91 to −0.83 (see Supplementary Data  2 ), another indication of good complementarity (where −1 is the best possible complementarity) 20 .

The most reliable generation systems

The colors in Fig.  2 show the reliability of electricity systems (i.e., the average percentage of electricity demand that is met each year from 1980 to 2018) based only on solar and wind resources for 18 major countries (4 from each of Asia, Europe, Africa, and the Americas, and 2 from Oceania; horizontal axes of each panel), according to: the mix of solar and wind generation (vertical axes), the level of annual generation relative to annual demand (1x in left panels and 1.5x in right panels), and the capacity of energy storage relative to mean electricity demand (0, 3, and 12 h in the first, second, and third rows of panels, respectively). Results for 24 other countries are shown in Supplementary Fig.  3 and Supplementary Data  3 . Figure  2a shows that without any excess annual generation or energy storage (assuming perfect national transmission), the most reliable mixes (white circles) of solar and wind generation could potentially meet 72–91% (average 83%) of electricity demand in these countries. Under these generation and storage assumptions, the most reliable solar-wind generation mixes range from 65 to 85% wind power (73% on average), with countries with substantial desert (like Algeria, Egypt, South Africa) favoring slightly more solar and less wind (65–70% wind) and with higher-latitude countries like Russia and Canada favoring more wind (85% wind; Fig.  2a ).

Shading in each panel represents the 39-year average estimated reliability (% of total annual electricity demand met) by a mix of solar and wind resources ranging from 100% solar to 100% wind (every 5% change for solar-wind generation mix). 18 main countries are chosen to show their ability to meet total annual electricity demand, including 16 main countries from four continents (Asia, Europe, Africa, and the Americas) and 2 main countries from Oceania. The white circles represent the highest reliability within each country under 21 sets of solar and wind generation mix (called the most reliable mix). Storage and generation quantities are varied in each panel: a 1x generation without storage; b 1x generation with 3 h of storage; c 1x generation with 12 h of storage; d 1.5x generation without storage; e 1.5x generation with 3 h of storage; and f 1.5x generation with 12 h of storage.

Adding 3 h of energy storage, but still without excess annual generation, increases the reliability so that the most reliable mixes (white circles) meet 78–93% (average 87%) of electricity demand. The share of solar generation in these most reliable mixes increases to 15–50% (36% on average; Fig.  2b ). However, the share of solar generation increases less, or even decreases, in higher-latitude countries like Russia, Canada, and Germany (Fig.  2b ). These trends continue as more storage is added, so that with 12 h of energy storage and no excess annual generation, 83–94% (average 90%) of electricity demand is met with mixes of 10–70% solar power (49% on average; Fig.  2c ).

If generating capacities are instead increased so that annual generation exceeds annual demand in each country by 50% (i.e., 1.5x generation), but without energy storage, the most reliable mixes meet 83–99% (average 94%) of electricity demand. The 1.5x generation most reliable mixes are substantially more reliable than in the 1x generation systems but include more wind power: 70–90% wind power (78% on average; Fig.  2d ). These “overbuilt” systems are more reliable in all of these 18 countries than the systems with 12 h of energy storage but no excess generation (Fig.  2c ). Adding energy storage to systems whose generation is 1.5x annual demand again increases both the system reliability (89–100%, average 98%) and the share of solar generation (most reliable mixes have 10–60% solar power, 36% on average; Fig.  2e, f ).

The unmet demand

The scatter plots in Fig.  3 show the relationships among reliability, energy storage, excess annual generation, and countries’ land area for the most reliable solar-wind mixes of all 42 countries analyzed (see relationships with a log y-axis in Supplementary Fig.  4 ). The linear fits in each panel show that solar-wind systems are generally less reliable in countries with smaller land areas (e.g., Fig.  3a ). Specifically, our results across countries indicate that the reliability of solar-wind systems that lack energy storage increases by 7.2% for every factor of 10 increase in land area; this relationship further suggests the improvement in system reliability that might be expected by expanding transmission systems within large countries. However, excess annual generation tends to alleviate the disadvantage of small country area more than energy storage (this can be seen by comparing the slopes of the linear fits in panels of Fig.  3c and d ). In addition, within each country, to compare the gains in reliability from excess annual generation and energy storage, a nonlinear function was fit to the reliability given the land area, the level of annual generation, and the capacity of energy storage (see Supplementary  Information ). Our results indicate that a 10% increase in excess annual generation is equivalent to 3.9 h of storage (Supplementary Note  2 ).

Shading of bubbles represents the annual average hours of long-duration (>24 h) power supply gaps. Storage and generation quantities are varied in each panel: a 1x generation without storage; b 1x generation with 3 h of storage; c 1x generation with 12 h of storage; d 1.5x generation without storage; e 1.5x generation with 3 h of storage; and f 1.5x generation with 12 h of storage.

Figure  3 also points to the nature of systems’ unreliability: the color of bubbles indicates the average number of events in which there would be unmet demand in each of at least 24 contiguous hours (i.e., “long-duration gaps”). In systems that meet >95% of a countrie’s demand, dozens of such long-duration gaps often remain each year (yellow and green circles). In some countries, excess annual generation reduces the number of such long-duration gaps more than adding 12 h of energy storage (e.g., compare Sweden, Australia, Canada, and Russia in Fig.  3c and d ).

Figure  4 further characterizes the magnitude and duration of unmet demand in 16 major countries (removing two African countries from the 18 countries shown in Fig.  1 for figure symmetry; in descending order of their land area), with curves showing gaps of different system configurations sorted by their magnitude and according to the number of hours each year that such a gap occurred (power supply gap represents the fraction of unmet demand to the total demand in that hour averaging over 1980–2018; see relationships with a log y-axis in Supplementary Fig.  5 ). For example, the pale purple curves show that systems with no excess annual generation and 12 h of energy storage consistently have gaps in which >50% of demand is unmet for >1000 h per year (Fig.  4 ). Pale green curves show that systems with 50% excess annual generation and 12 h of energy storage may have much smaller and shorter gaps in some countries (e.g., <10% of demand unmet in fewer than 100 h per year in Russia, China, and Australia), but the gaps may still be >20% of demand for tens of hours or more in countries with relatively large land areas (e.g., Canada, Brazil, India, and Mexico) and >60% of demand for several hundred hours per year in countries with smaller areas (e.g., France, Japan, Germany, New Zealand, the U.K., and South Korea; Fig.  4 ). Indeed, in smaller countries, substantial gaps (>30% of demand for >20 h per year; pale orange curves in Fig.  4 ) remain in systems even with 12 h of energy storage and annual generation that is 3x annual demand.

Areas under each curve show the share and hours of unmet electricity demand of the most reliable solar-wind systems in selected countries assuming specified storage and generation quantities: a Russia; b Canada; c contiguous U.S.; d China; e Brazil; f Australia; g India; h Algeria; i Mexico; j South Africa; k France; l Japan; m Germany; n New Zealand; o United Kingdom; p South Korea (see data in Supplementary Data  6 ). Color of lines represents different generation quantities: 1x generation in purple, 1.5x generation in green, and 3x generation in orange. Shading of lines represents different storage quantities: darkest shading represents without storage, medium shading represents 3 h of storage, and lightest shading represents 12 h of storage. Note that the y-axis of power supply gap represents the fraction of unmet demand to the total demand in that hour.

Benefits from sharing resources of multiple nations

We also evaluate the reliability benefits of regional electricity interconnections whereby the solar and wind resources of multiple nations are pooled and shared, again assuming perfect transmission within these regions. The maps in Fig.  5 present the effects of such spatial aggregation, showing the highest reliability of solar-wind generation with no excess annual generation or energy storage at the national level (Supplementary Data  7 ; Fig.  5a ), as well as when a system is aggregated into 19 separate, contiguous multinational regions (Fig.  5b ; categorization in Supplementary Data  4 ) and 6 continents (Supplementary Data 7 ; Fig.  5c ). Each step produces substantial improvements in reliability, with >89.8% of hourly demand met everywhere when resources are aggregated at the continental level (Fig.  5c ). Figure  5c also indicates the additional reliability gains in these systems that would be achieved as a consequence of specific intercontinental connections. Supplementary Fig.  6 shows that the supply gaps in continental-scale solar-wind systems might be entirely eliminated in Africa, Asia, and South America, and limited to <2% of demand and 49, 26, and 13 h in Europe, Oceania, and North America, respectively, given excess annual generation of 50% and 12 h of storage. Substantial supply gaps remain for continental-scale systems when excess annual generation and energy storage are not available (Supplementary Fig.  7 ).

Maps show the reliability (i.e., hourly averaged resource adequacy) at country/region scale ( a ; Supplementary Data  4 ), the subcontinent scale ( b ; 19 multinational regions, and listed in the SI), and at continental scale ( c ; 6 continents: Asia, Europe, Africa, North America, South America, and Oceania). We also evaluated the reliability of the power supply system assuming several intercontinental connections (shown as the arrows: Asia–Oceania, Europe–Asia, Europe–Africa, North America–Europe, and North America–South America). The added reliabilities for each continental power system under various connections are labeled.

Our results suggest that, neglecting transmission constraints, with systems sized to meet time-integrated annual electricity demand, major countries’ solar and wind resources could meet at least 72% of instantaneous electricity demand without excess annual generation or energy storage. For instance, in the contiguous U.S., a solar and wind power system could provide ~85% of total electricity demand, which is consistent with the prior studies and reports 12 , 25 . Solar and wind resources can achieve greater levels of reliability by adding energy storage, increasing deployed capacities (i.e., generating electricity in excess of annual demand), or pooling resources of contiguous, multinational regions 26 . However, the marginal improvements in reliability related to these options differ considerably across countries and regions, according to their land area, location, and geophysical resources (Supplementary Figs.  8 and 9 ).

In small, high-latitude countries, the highest reliability systems are usually wind-heavy (e.g., as high as 95% wind power), with particularly large reliability gains achievable by regional aggregation. In contrast, the most reliable systems in temperate/tropical countries tend to include more solar. Meanwhile, the most reliable systems are not always the same systems that would minimize the frequency of long-duration (≥24 h) power supply gaps (Supplementary Fig.  9 ). In general, more solar in the wind-solar mix reduces the frequency of long-duration gaps. Although reasonably high levels of reliability can be reached by solar-wind resources alone, the defining challenge of such systems are the longer-duration gaps, often associated with extreme weather episodes. For instance, historical solar and wind resources data in Germany reveal that there were nearly 2 weeks in which dispatchable generation had to cover practically all of the demand because of a period with very low solar and wind power availability (called “dark doldrums”) 27 . Although with vast enough wind and solar capacity it might still be possible to meet demand in all hours, the required capacity increases exponentially after a point that depends on the renewable resources of that country, and it is this geophysically-dependent point that will largely determine the cost-effectiveness of highly-reliable, renewables-based electricity systems. Although dispatchable fossil fuel generators with 100% effective carbon capture storage (CCS) could provide system reliability without emissions 2 , such underutilized and capital-intensive backup electricity would require higher investments and variable costs. In contrast, combustion turbines or combined cycle plants burning carbon-neutral biogas, syngas, or hydrogen might have comparatively low capital costs, but would require additional and large capital investments to produce such fuels (e.g., biodigestion, direct air capture, Fischer-Tropsch, and/or electrolysis). Sector-coupling or right-sizing of these net-zero emissions fuel-production facilities could nonetheless make infrequent operation of generators feasible 28 . More firm generation would mean less solar and wind capacity in a given system, which might or might not be cost-effective depending on technology costs. But many jurisdictions and advocates are interested in “maxing out” solar and wind. Our results are especially relevant in that context, highlighting the implications of country-level differences in the variability of solar and wind resources, including how much storage and firm generation might be required to ensure resource adequacy. Although our methods are simple and transparent, our goals and findings are remarkably consistent with much more complex approaches. For example, the recently published Net-Zero America report includes a cost-optimized “all-renewables” scenario which decarbonizes U.S. electricity without nuclear or CCS: by 2050, ~81.6% of primary energy in the E + RE + scenario is from solar and wind 29 .

Our analysis has important limitations and uncertainties. To improve the generality of our results, our analysis focuses exclusively on geophysical constraints and does not consider economic feasibility. As noted throughout, our reliability estimates are a best case given the assumption that electricity can be transmitted losslessly throughout a region of interest. Also, we use area-weighted averages for solar and wind generation potential without regard to existing protections or uses. This use of area-weighted averages affects our estimates in two important ways. First, our estimates may include areas where currently generation cannot be sited. Second, our derivation of solar and wind capacity factors implies uniform distribution of wind and solar generation technology (i.e., a horizontal single-axis tracking system applied in this work), which does not allow us to select locations with particularly high capacity factors or to strategically select a set of locations whose generating potential is mutually negatively correlated. This second point has the effect of making our estimates for the efficacy of solar and wind resources to meet electricity demand more conservative by using the horizontal single-axis tracking system compared to the dual-axis solar tracking systems. For this case, dual-axis solar tracking systems are added to test the impacts on the system reliabilities (see Supplementary Note  3 ), we find that different solar tracking systems have very small impacts on the electricity system reliabilities and the reliability change ratios are within ±5% under the 1x generation system and less sensitive under 3x generation system (Supplementary Fig.  10 ). However, either method to calculate capacity factors of national and regional area-weighted averages may also reduce the resource variability and thereby increase estimates of reliability. Third, hourly variations of solar and wind capacity factors in the reanalysis data MERRA-2 we used may be biased. A new analysis based on a different and independent reanalysis product, ERA5 30 , 31 , has been added and compared to the original results (see Supplementary Note 3 and Supplementary Figs.  11 - 12 ). Our estimates of the system reliabilities by using ERA5 data in the 42 major countries are in good agreement with results of MERRA-2: under 1x generation and the most reliable mixes without storage, reliability under the different loads varies on average from −9.4 to 1.3% (see Supplementary Fig.  9a ). The differences are similar in systems with excess generation (Figs. S11b-c). We also compared the magnitude and duration of unmet demand in 16 major countries like Fig.  4 (see Supplementary Fig.  12 ). The data products of MERRA-2 and ERA5 both can essentially capture the number of hours each year that such a gap occurred. By contrast, the MERRA-2 data has a better performance of meeting hourly demand in larger countries (i.e., Russia and Canada) but a similar performance in small countries (i.e., United Kingdom). The somewhat different patterns of resource variability in the two datasets do not alter our main conclusions.

Our estimates show that the marginal reliability benefit of increased capacity of storage or increased overbuild of wind/solar declines steadily. Under a given capacity of energy storage (e.g., 3 h), our results of 1x, 1.5x, and 3x generation show that the first 10% excess generation increase is larger than the next 10% excess generation increase (i.e., the marginal benefit for system reliability decreases as excess generation increases). As might be expected, the diminishing marginal benefits between excess generation and increased storage apply in both directions. Our fitting model performs well across different nations, overbuild levels, and storage levels. The differences in reliability between the estimates and the model predicted values are between −5.5 and 5.8% and ~80% of the differences are within ±2%, with no systematic bias related to region or the magnitude of overbuild or storage. Nonetheless, our model and conclusions are limited by our experimental design and the discrete levels of excess generation (1x, 1.5x, and 3x) and storage (0, 3, and 12 h) we evaluated.

We compare the reliability improvements obtainable by energy storage, excess capacity, and regional aggregation but not the relative costs of the different options. For example, the energy storage capacities we consider are in some cases quite large: energy storage equal to 12 h of mean electricity demand in the contiguous U.S., Germany, and Japan represents 5.6, 0.7, and 1.4 TWh, respectively (Supplementary Data  5 ). These combined storage capacities represent ~35 times the capacity of Li-ion batteries produced globally to date 32 , and more than 200 times the pumped hydro storage capacities that now exist in those countries 33 . The feasibility of 12 or more hours of energy storage may depend on continued innovation and learning related to the associated materials and technologies 34 , 35 , 36 , 37 . Similarly, the feasibility of pooling solar and wind resources over national or multinational regions may depend on both technological advances that reduce the costs, losses, and risks of power transmission 38 , 39 , 40 as well as shifts in the socio-political support for such infrastructure 41 , 42 . In addition, setting up purely solar and wind supplied electricity systems requires a large number of solar panels and wind turbines to be installed, and we do not incorporate the impacts or interactions (e.g., wakes) from these hypothetical build-outs. Last, in this work, only 1-year of demand data is employed to assess the geophysical constraints of 39-year solar and wind resources. On one hand, we understand that the hourly patterns of countries electricity demand will of course change over time with changes in population, economic activities, power generation structure, and technology. For example, stronger positive correlation between solar/wind availability and demand may be observed as renewable energy gradually dominates the power system. However, our analysis compares resources and demand in different years and at the country-level, which should preclude any bias related to specific subnational weather events. On the other hand, electricity demand profile may also dramatically change with future high electrification. We therefore perform additional analysis using the demand pattern from the future high electrification scenario (i.e., combining the high electrification scenario and rapid technology advancement) 43 and use the results to discuss the sensitivity of our results to such different load profiles (see Supplementary Fig.  13 ), and the results of this test for the U.S. show that reliability is not especially sensitive to the high electrification demand profile: under 1x generation without storage, reliability under the different renewable mixes varies on average from −1 to 2.5%. The differences are even smaller in solar-heavy systems with excess generation. In addition, we test the sensitivity of our results to such changes in demand by simulating the reliability of U.S. resources in meeting current loads from each other region (see Supplementary Note  4 ). These tests show that reliability is not especially sensitive to demand profiles: under 1x generation and the most reliable mixes without storage, reliability under the different loads varies on average from −9 to 2% (see Supplementary Fig.  14a ). The differences become even smaller in systems with excess generation (Supplementary Fig.  14 ).

Despite these simplifying assumptions, our results offer insights from those provided by multi-year time step integrated assessment modes (IAMs) or hourly, cost-optimized energy system models. Specifically, hourly resolution over several decades allows us to evaluate the adequacy of regional solar and wind resources independent of costs. For example, cost-optimizing models which either require renewables sources to meet a very high share of demand or else assume extremely cheap renewable costs generally find substantial increases in system costs related to, e.g., energy storage. Our geophysically-focused results help to explain such results irrespective of cost assumptions. Indeed, we compare the estimates of reliability and capacities in this study with several techno-economic studies that have used independent approaches to model regional solar- and wind-dominated electricity systems in detail 29 , 44 , 45 . In each case, focusing on the U.S., these studies find that the share of non-emitting (or carbon neutral) electricity contributed by solar and wind in cost-optimized systems is typically ~80%, with the residual demand for non-emitting generation met by firmer renewables such as biomass, hydroelectricity, and geothermal 29 , 44 , 45 .

Variable solar and wind energy are projected by many to be the dominant sources of electricity in net-zero emissions energy systems of the future. With solar and wind capacities sized such that total annual generation meets total annual demand, seasonal and daily complementarities of these resources make them capable of meeting three-quarters of hourly electricity demand in larger countries. Increasing the share of demand that can be met by solar and wind generation will require either “overbuilding” (i.e., excess annual generation), the introduction of large-scale energy storage, and/or aggregating resources across multinational regions (Supplementary Data  6 ). We highlight the geophysical considerations related to these options, but economics and geopolitics will also strongly influence which strategies are ultimately adopted and are therefore important topics for further research. Our analysis for the 39-year record of solar and wind resources is in part to obtain a statistically significant analysis of interannual variability and rare events (such as prolonged storms). Establishing estimates for interannual variability and the frequency of rare events that impact solar and wind generation potential is important when considering the lifetime of the capital asset stock in an electricity grid and requires the use of many years of data. Our normalized analysis of the reliability for purely solar and wind supplied electricity system would apply as well to a system with other slowly time-varying generation (e.g., coal, hydro, geothermal, or nuclear) because the variability of solar and wind generation and related long-duration gaps in electricity supply will have to be managed either by ramping backup technologies up and down or by curtailing excess solar and wind generation. Our results reveal national and regional differences in solar and wind resources that may be useful to decision makers and researchers prioritizing their investments in pursuit of reliable and cost-effective electricity systems based predominantly on solar and wind energy.

Hourly solar and wind capacity factors

The capacity factor describes the actual energy output as compared to the systems’ rated energy output (power capacity multiplied by 1 h) 12 . To calculate the wind and solar capacity factors for this study, we first obtained the hourly climatology data from the Modern-Era Retrospective analysis for Research and Application, Version-2 (MERRA-2) reanalysis product, which spans 39 years (1980–2018) and has a horizontal resolution of 0.5° by latitude [−90–90°] and 0.625° by longitude [−180–179.375°] with 361 × 576 grid cells worldwide 21 , 22 . Here we used the surface incoming shortwave flux [W m −2 ] (variable name: SWGDN), top-of-atmosphere incoming shortwave flux [W m −2 ] (variable name: SWTDN), and surface air temperature [K] (variable name: T) for deriving solar capacity factors; and wind speed at 100 m [m s −1 ], estimated based on wind speed at 10 m and 50 m (variable names: U10M, V10M, U50M, and V50M) and a power-law relationship, to derive wind capacity factors. Wind and solar capacity factors were calculated for each grid cell and each hour. Each raw data point (an hourly energy density (solar) or wind speed (wind) value at a specific location and time) was then converted into the corresponding capacity factor based on the following procedures.

For solar capacity factor, we first calculated the solar zenith angle and the solar incidence angle for each grid based on the latitude/longitude location and local time 46 , 47 , and then estimated the in-panel solar radiation 48 . Here we separated the direct and diffuse solar radiation components based on an empirical piecewise model 49 that takes into account both ratios of surface to top-of-atmosphere solar radiation (i.e., the clearness index) and the local zenith angle. We assumed a horizontal single-axis tracking system (north-south direction) with a tilt of the solar panel to be 0° and a maximum tuning angle of 45°. Solar power output from a given panel is calculated using the performance model described by Huld et al. 50 and Pfenninger and Staffell 51 , which considers both the surrounding temperature and the effect of irradiance. It is noted that we assumed the single-axis trackers for calculating solar capacity factors, which may be unsuitable enough for the small countries such as Japan, South Korea, and United Kingdom. These small countries do not have enough uncommitted land area for that and are going very likely to have to favor no tracking with rooftop photovoltaic system. Therefore, we further assessed the impacts of different solar tracking systems (i.e., single-axis and dual-axis for both a horizontal and a vertical axis) on the electricity system reliability. The detailed comparisons are shown in the SI (Supplementary Note  3 and Supplementary Fig.  10 ).

For wind capacity factor, by assuming a wind turbine hub height of 100 m, the raw wind speed data is first interpolated to 100 m by employing a power law, based on wind speed at 10 and 50 m. The 100-m-height wind speed is estimated by employing the following Eqs. ( 1 ) and ( 2 ):

where \(i,\alpha\) represent grid and alpha exponent for wind profile, and \({U}_{10},{U}_{50},\) and \({U}_{100}\) represent wind speed at 10, 50, and 100 m.

The wind capacity factor calculation employed a piecewise function consisting of four parts: (i) below a cut-in speed ( \({u}_{{ci}}\) ) of 3 m s −1 the capacity factor is zero, (ii) between the cut-in speed of 3 m s −1 and rated speed ( \({u}_{r}\) ) of 12 m s −1 the capacity factor is \({{u}_{{ci}}}^{3}/{{u}_{r}}^{3}\) , (iii) between the rated speed of 12 m s −1 and the cut-out speed ( \({u}_{{co}}\) ) of 25 m s −1 the capacity factor is 1.0, and (iv) above the cut-out speed of 25 m s −1 the capacity factor is zero 12 , 52 , 53 . The process yielded the solar and wind capacity factors for each grid cell and each hour.

An area-weighed mean hourly energy generation profile was created for the solar and wind resources individually for each region of interest. In this work, hourly solar and wind capacity factors for 168 countries/regions were produced. Capacity factors derived from reanalysis data were known to differ from real-world systems 12 , 54 , and thus these calculated capacity factors from the reanalysis dataset were rescaled. That is, the reanalysis data were used herein only for reflecting the temporal and spatial characteristics of the resource. For consistency, we normalized capacity factor values using the 25th percentile calculated capacity factor data for a region of interest due to data availability of real-world wind and solar capacity factors from public datasets or reports for all the countries and regions of interest. Our estimates represent real-world wind and solar capacity factors that are in good agreement with available observational data 55 . We then obtained the time-series hourly normalized wind and solar capacity factor dataset at the country/region level.

Country-level hourly electricity demand data

In this work, country-level hourly electricity demand data were estimated in various ways, such as from government and electricity market websites, public power systems datasets, and previous studies (Supplementary Data  1 ). As shown in Supplementary Data  1 , we compiled 168 countries and regions’ demand data, including real-word hourly demand data of 62 countries and regions, and projected hourly demand data of the rest due to data availability 56 . Toktarova et al. developed a multiple linear regression model to project electricity demand in hourly resolution for all countries globally by incorporating 57 real load data profiles of diverse countries to analyze the cyclical pattern of the data. In addition, given the different self-consistent continuous gapless time series of hourly electricity demand among different countries and regions, a single latest year of hourly electricity demand data was used in our following simulations to investigate the impact of diversity of solar and wind resources across years on power system reliability for countries and regions with available real-world electricity data. For the rest of the countries and regions, we chose the hourly electricity demand data of the most recent year of future (i.e., the year of 2020) from the projection model 56 . We herein obtained the country-level demand dataset by joining the 1-year hourly demand data together 39 times to form a 39-year record consistent with the resource data. In addition, for regional demand data, we combined all the demand data of available countries within the according region at hourly scale to represent the temporal characteristics.

Simulation design

A set of forward simulations were performed to track the ability of wind, solar installed capacity, and energy storage, if present, to meet demand in every hour. In this study, we used a Macro Energy Model (MEM), which is developed for optimizing electricity system (or electricity and fuels) without considering any spatial variation, policy, capacity markets 57 . Without considering any power system cost, generation technology, and transmission loss, we modeled the idealized hourly power supply process through dispatching wind and solar energy, as well as charging or discharging of storage, if present. Here we specified the wind and solar installed capacity, and storage capacity under the various capacity mixes of solar and wind fractions (i.e., every 5% change of solar fraction from 0% solar and 100% wind to 100% solar and 0% wind) and different levels of excess annual generation (i.e., 1x, 1.5x, and 3x generation) and energy storage (i.e., maximun 3 and 12 h of charging time) assumptions. The installed capacities for solar, wind, and storage for individual countries/regions are estimated using the Eqs. ( 3 )–( 5 ).

where \(y\) and \(s\) represent the year and size, respectively. \({{{{Capacity}}}}_{{{{solar}}}}\) , \({{{{Capacity}}}}_{{{{wind}}}}\) , and \({{{{Capacity}}}}_{{{{{{{\mathrm{storage}}}}}}}}\) represent the solar, wind, and storage capacities, respectively. \({{{{{\rm{SF}}}}}}\) represents the fraction of energy generated from solar (from 0 to 100% at intervals of 5%); \({{{{{\rm{OB}}}}}}\) represents the overbuilding of capacity, equaling 1, 1.5, or 3; \({{{{{\rm{Pwr}}}}}}\_{{{{{\rm{avg}}}}}}\) represents the mean power demand; \({{{{{\rm{Hrs}}}}}}\) represents the total hours in the year; \({{{{{\rm{CF}}}}}}_{{solar}}\) and \({{{{{{\rm{CF}}}}}}}_{{{{wind}}}}\) represent normalized capacity factors of solar and wind, respectively. And \({{{{{\rm{Bat}}}}}}\) represents battery storage, equaling 0 (i.e., no storage), 3, or 12.

When storage was assumed to be available, we assumed the initial status of storage was the same as the final status for each year, which means the charging and discharging process is balanced. We also assumed a storage charging round-trip efficiency and storage decay rate of, respectively, 90% and 1.14 × 10 −6 per hour (i.e., 1% of stored electricity lost per month) 2 , reflecting the high-end performance of current batteries 58 , 59 . Dispatchable energy used to charge a battery (called the maximum hourly storage charging) was no more than the storage power rating, equaling storage capacity divided by storage charging time.

Given the restriction of computing resources, we chose ten major countries by comprehensively considering the electricity demand and growth domestic product (GDP) from each continent except Oceania (i.e., Asia, Africa, Europe, and the America), within which only two main countries were selected (i.e., Australia and New Zealand). For each main country, 21 sets of the solar and wind mix from 0% solar and 100% wind to 100% solar and 0% wind with 5% change under 3 groups of overbuilt (1x, 1.5x, and 3x generation) and 3 groups of storage (no storage, 3 h, and 12 h of storage) were simulated, totaling 7938 simulations for all the main countries. To investigate the ability to supply power at multinational regions, continental, and intercontinental scales, we further applied the same simulation design for the main countries to multinational regions, continents, and multi-continental regions (Supplementary Data  4 ). In addition, except the abovementioned main countries, 103,194 one-year simulations consisting of 21 sets of the solar and wind mix with no excess generation or energy storage, were added for each of the remaining 126 countries worldwide.

Hourly electricity supply process

For only solar-wind electricity systems without storage, in a given hour, the MEM model estimates the ability of power to be produced by assessing whether dispatchable solar and wind energy is no less than electricity demand. Excess solar and wind energy can be curtailed due to no available storage. 100% reliability results if the solar and wind power supply system can meet all the electricity demand in every hour of the simulation.

When storage is assumed to be available in a given hour, if the solar and wind energy could meet the electricity demand, storage would be charged with excess solar and wind generation, if available, until the storage is full under the constraint of the maximum hourly storage charging, after which solar and wind energy can be curtailed. In contrast, if wind and solar energy cannot meet electricity demand, storage would be discharged to fill the power supply gap until storage is emptied or the power supply gap is filled.

Here, we define reliability assuming electricity systems use only wind/solar/storage resources to meet current demand for electricity services. If one allows for other backup electricity (e.g., using natural gas with or without CCS), then issues of reliability with excess annual generation and/or storage are largely moot.

Data availability

The electricity demand, solar, and wind capacity factors data generated for this study have been deposited in Dantong2021/Geophysical_constraints: Data of electricity demand, solar and wind capacity factors (v1.0). Zenodo. https://doi.org/10.5281/zenodo.5463202 .

Code availability

The Macro Electricity Model (MEM) code is available on GitHub via https://github.com/ClabEnergyProject/MEM .

Rogelj, J. et al. Energy system transformations for limiting end-of-century warming to below 1.5 °C. Nat. Clim. Change 5 , 519–527 (2015).

Article   ADS   Google Scholar  

Davis, S. J. et al. Net-zero emissions energy systems. Science 360 , eaas9793 (2018).

Article   PubMed   CAS   Google Scholar  

Tong, D. et al. Committed emissions from existing energy infrastructure jeopardize 1.5 °C climate target. Nature 572 , 373–377 (2019).

Article   CAS   PubMed   PubMed Central   Google Scholar  

Luderer, G. et al. The role of renewable energy in climate stabilization: results from the EMF27 scenarios. Clim. Change 123 , 427–441 (2014).

Millstein, D., Wiser, R., Bolinger, M. & Barbose, G. The climate and air-quality benefits of wind and solar power in the United States. Nat. Energy 2 , 17134 (2017).

Pehl, M. et al. Understanding future emissions from low-carbon power systems by integration of life-cycle assessment and integrated energy modelling. Nat. Energy 2 , 939–945 (2017).

Article   ADS   CAS   Google Scholar  

Grubler, A. et al. A low energy demand scenario for meeting the 1.5 °C target and sustainable development goals without negative emission technologies. Nat. Energy 3 , 515–527 (2018).

Rogelj, J. et al. In Global warming of 1.5   °C. An IPCC Special Report on the Impacts of Global warming of 1.5   °C above Pre-Industrial Levels and Related Global Greenhouse Gas Emission Pathways, in the Context of Strengthening the Global Response to the Threat of Climate Change, Sustainable Development, and Efforts to Eradicate Poverty (eds Masson-Delmotte, V. et al.) https://www.ipcc.ch/site/assets/uploads/sites/2/2019/05/SR15_Chapter2_Low_Res.pdf (2018).

Rogelj, J. et al. Scenarios towards limiting global mean temperature increase below 1.5 °C. Nat. Clim. Change 8 , 325–332 (2018).

Luderer, G. et al. Environmental co-benefits and adverse side-effects of alternative power sector decarbonization strategies. Nat. Commun. 10 , 1–13 (2019).

Article   CAS   Google Scholar  

Drechsler, M. et al. Efficient and equitable spatial allocation of renewable power plants at the country scale. Nat. Energy 2 , 17124 (2017).

Shaner, M. R., Davis, S. J., Lewis, N. S. & Caldeira, K. Geophysical constraints on the reliability of solar and wind power in the United States. Energy Environ. Sci. 11 , 914–925 (2018).

Article   Google Scholar  

Jacobson, M. Z. et al. 100% clean and renewable wind, water, and sunlight all-sector energy roadmaps for 139 countries of the world. Joule 1 , 108–121 (2017).

Heard, B. P., Brook, B. W., Wigley, T. M. L. & Bradshaw, C. J. A. Burden of proof: a comprehensive review of the feasibility of 100% renewable-electricity systems. Renew. Sust. Energ. Rev. 76 , 1122–1133 (2017).

Arbabzadeh, M., Sioshansi, R., Johnson, J. X. & Keoleian, G. A. The role of energy storage in deep decarbonization of electricity production. Nat. Commun. 10 , 1–11 (2019).

CAS   Google Scholar  

Sepulveda, N. A., Jenkins, J. D., de Sisternes, F. J. & Lester, R. K. The role of firm low-carbon electricity resources in deep decarbonization of power generation. Joule 2 , 2403–2420 (2018).

Budischak, C. et al. Cost-minimized combinations of wind power, solar power and electrochemical storage, powering the grid up to 99.9% of the time. J. Power Sources 225 , 60–74 (2013).

Planning Resource Adequacy Analysis, Assessment and Documentation (Standard BAL-502-RF-03). https://www.nerc.com/pa/Stand/Reliability%20Standards/BAL-502-RF-03.pdf (2017).

Carden. K., Wintermantel, N. & Pfeifenberger J. The Economics of Resource Adequacy Planning: Why Reserve Margins Are Not Just About Keeping the Lights On (National Regulatory Research Institute, 2011).

Jurasz, J., Canales, F. A., Kies, A., Guezgouz, M. & Beluco, A. A review on the complementarity of renewable energy sources: concept, metrics, application and future research directions. Sol. Energy 195 , 703–724 (2020).

Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2). https://gmao.gsfc.nasa.gov/reanalysis/MERRA-2/ (2021).

Gelaro, R. et al. The modern-era retrospective analysis for research and applications, version 2 (MERRA-2). J. Clim. 30 , 5419–5454 (2017).

Article   ADS   PubMed   Google Scholar  

Lee, J. C. Y., Fields, M. J. & Lundquist, J. K. Assessing variability of wind speed: comparison and validation of 27 methodologies. Wind Energy Sci . 3 , 845–868 (2018).

Hyndman, R. J. & Fan, S. Density forecasting for long-term peak electricity demand. IEEE T. Power Syst. 25 , 1142–1153 (2010).

Mai, T., Sandor, D., Wiser, R. & Schneider, T. Renewable Electricity Futures Study: Executive Summary Vol. 55, https://www.nrel.gov/docs/fy13osti/52409-ES.pdf (2012).

Brinkerink, M., Gallachóir, B. Ó. & Deane, P. A comprehensive review on the benefits and challenges of global power grids and intercontinental interconnectors. Renew. Sust. Energ. Rev. 107 , 274–287 (2019).

Craig, M. Germany’s worse-case scenario in the power sector. https://energytransition.org/2017/07/germanys-worse-case-scenario-in-the-power-sector/#more-15335 (2017).

Dowling, J. A. et al. Role of long-duration energy storage in variable renewable electricity systems. Joule 4 , 1907–1928 (2020).

Larson, E. et al. Net-Zero America: Potential Pathways, Infrastructure, and Impacts . Interim report, Princeton University, Princeton, NJ (2020).

Jourdier, B. Evaluation of ERA5, MERRA-2, COSMO-REA6, NEWA and AROME to simulate wind power production over France. Adv. Sci. Res. 17 , 63 (2020).

Sianturi, Y., Marjuki & Sartika, K. Evaluation of ERA5 and MERRA2 reanalyses to estimate solar irradiance using ground observations over Indonesia region. AIP Conf. Proc. 2223 , 020002 (2020).

Battery Megafactory Forecast: 400% Increase in Capacity to 1 TWh by 2028. https://www.visualcapitalist.com/battery-megafactory-forecast-1-twh-capacity-2028/ (2018).

The International Renewable Energy Agency (IRENA): Renewable Capacity Statistics 2018. https://www.hydroreview.com/2018/04/10/data-source-irena-releases-renewable-capacity-statistics-2018-report/#gref (2018).

Braff, W. A., Mueller, J. M. & Trancik, J. E. Value of storage technologies for wind and solar energy. Nat. Clim. Change 6 , 964–969 (2016).

Kittner, N., Lill, F. & Kammen, D. M. Energy storage deployment and innovation for the clean energy transition. Nat. Energy 2 , 17125 (2017).

Sepulveda, N. A., Jenkins, J. D., Edington, A., Mallapragada, D. S. & Lester, R. K. The design space for long-duration energy storage in decarbonized power systems. Nat. Energy 6 , 506–516 (2021).

Ziegler, M. S. et al. Storage requirements and costs of shaping renewable energy toward grid decarbonization. Joule 3 , 2134–2153 (2019).

Wu, G. C. et al. Strategic siting and regional grid interconnections key to low-carbon futures in African countries. Proc. Natl Acad. Sci. USA 114 , E3004–E3012 (2017).

CAS   PubMed   PubMed Central   Google Scholar  

Clack, C. T. M. et al. Evaluation of a proposal for reliable low-cost grid power with 100% wind, water, and solar. Proc. Natl Acad. Sci. USA 114 , 6722–6727 (2017).

Article   ADS   CAS   PubMed   PubMed Central   Google Scholar  

Barasa, M., Bogdanov, D., Oyewo, A. S. & Breyer, C. A cost optimal resolution for Sub-Saharan Africa powered by 100% renewables in 2030. Renew. Sust. Energ. Rev. 92 , 440–457 (2018).

Geels, F. W., Sovacool, B. K., Schwanen, T. & Sorrell, S. The socio-technical dynamics of low-carbon transitions. Joule 1 , 463–479 (2017).

Lauber, V. & Jacobsson, S. The politics and economics of constructing, contesting and restricting socio-political space for renewables—The German Renewable Energy Act. Environ. Innov. Soc. Tr. 18 , 147–163 (2016).

Mai, T. et al. Electrification Futures Study: Scenarios of Electric Technology Adoption and Power Consumption for the United States . National Renewable Energy Laboratory. NREL/TP-6A20-71500. https://doi.org/10.2172/1459351 (2018).

Williams, J. H. et al. Carbon-neutral pathways for the United States. AGU Adv. 2 , e2020AV000284 (2021).

MacDonald, A. E. et al. Future cost-competitive electricity systems and their impact on US CO 2 emissions. Nat. Clim. Change 6 , 526–531 (2016).

Braun, J. E. & Mitchell, J. C. Solar geometry for fixed and tracking surfaces. Sol. Energy 31 , 439–444 (1983).

Meeus, J. H. Astronomical Algorithms (Willmann-Bell, Incorporated, 1991).

Perez, R., Ineichen, P., Seals, R., Michalsky, J. & Stewart, R. Modeling daylight availability and irradiance components from direct and global irradiance. Sol. Energy 44 , 271–289 (1990).

Reindl, D. T., Beckman, W. A. & Duffie, J. A. Diffuse fraction correlations. Sol. Energy 45 , 1–7 (1990).

Huld, T., Gottschalg, R., Beyer, H. G. & Topič, M. Mapping the performance of PV modules, effects of module type and data averaging. Sol. Energy 84 , 324–338 (2010).

Pfenninger, S. & Staffell, I. Long-term patterns of European PV output using 30 years of validated hourly reanalysis and satellite data. Energy 114 , 1251–1265 (2016).

Bett, P. E. & Thornton, H. E. The climatological relationships between wind and solar energy supply in Britain. Renew. Energy 87 , 96–110 (2016).

Rose, S. & Apt, J. Quantifying sources of uncertainty in reanalysis derived wind speed. Renew. Energy 94 , 157–165 (2016).

Staffell, I. & Pfenninger, S. Using bias-corrected reanalysis to simulate current and future wind power output. Energy 114 , 1224–1239 (2016).

Form EIA-860 detailed data with previous form data (EIA-860A/860B). https://www.eia.gov/electricity/data/eia860/ (2019).

Toktarova, A., Gruber, L., Hlusiak, M., Bogdanov, D. & Breyer, C. Long term load projection in high resolution for all countries globally. Int. J. Elec. Power 111 , 160–181 (2019).

Macro Energy Model (MEM). https://github.com/ClabEnergyProject/MEM (2019).

Pellow, M. A., Emmott, C. J., Barnhart, C. J. & Benson, S. M. Hydrogen or batteries for grid storage? A net energy analysis. Energy Environ. Sci. 8 , 1938–1952 (2015).

Wang, H., Jiang, Y. & Manthiram, A. Long cycle life, low self-discharge sodium–selenium batteries with high selenium loading and suppressed polyselenide shuttling. Adv. Energy Mater. 8 , 1701953 (2018).

Download references

Acknowledgements

This work was supported by the National Natural Science Foundation of China (41921005). D.T., D.J.F., L.D., and K.C. were supported by the Carnegie Institution for Science endowment and a gift from Gates Ventures, Inc. S.J.D. was supported by the US National Science Foundation (Innovations at the Nexus of Food, Energy and Water Systems (INFEWS) grant EAR 1639318).

Author information

Authors and affiliations.

Ministry of Education Key Laboratory for Earth System Modeling, Department of Earth System Science, Tsinghua University, Beijing, 100084, China

Dan Tong & Qiang Zhang

Department of Earth System Science, University of California, Irvine, CA, 92697, USA

Dan Tong & Steven J. Davis

Department of Global Ecology, Carnegie Institution for Science, Stanford, CA, 94035, USA

Dan Tong, David J. Farnham, Lei Duan, Nathan S. Lewis, Ken Caldeira & Steven J. Davis

Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, CA, 91125, USA

Nathan S. Lewis

Breakthrough Energy, 4110 Carillon Pt., Kirkland, WA, 98033, USA

Ken Caldeira

Department of Civil and Environmental Engineering, University of California, Irvine, CA, 92697, USA

Steven J. Davis

You can also search for this author in PubMed   Google Scholar

Contributions

K.C., N.S.L., S.J.D., and D.T. designed the study. D.T. performed the analyses, with support from D.J.F. on simulations and L.D. on resources estimates, and from S.J.D., Q.Z., N.S.L., and K.C. on analytical approaches. D.T. and S.J.D. led the writing with input from all coauthors.

Corresponding author

Correspondence to Dan Tong .

Ethics declarations

Competing interests.

The authors declare no competing interests.

Additional information

Peer review information Nature Communications thanks Jesse Jenkin and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary information, peer review file, description of additional supplementary files, supplementary data 1, supplementary data 2, supplementary data 3, supplementary data 4, supplementary data 5, supplementary data 6, rights and permissions.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ .

Reprints and permissions

About this article

Cite this article.

Tong, D., Farnham, D.J., Duan, L. et al. Geophysical constraints on the reliability of solar and wind power worldwide. Nat Commun 12 , 6146 (2021). https://doi.org/10.1038/s41467-021-26355-z

Download citation

Received : 24 February 2021

Accepted : 24 September 2021

Published : 22 October 2021

DOI : https://doi.org/10.1038/s41467-021-26355-z

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

This article is cited by

Climate change impacts on the extreme power shortage events of wind-solar supply systems worldwide during 1980–2022.

• Dongsheng Zheng
• Qiang Zhang

Nature Communications (2024)

Amplified positive effects on air quality, health, and renewable energy under China’s carbon neutral target

Nature Geoscience (2024)

Photovoltaic installations are extensively deployed in areas at risk of extremely low production

• Qianzhi Wang

Communications Earth & Environment (2024)

• Anders Wörman
• Ilias Pechlivanidis
• Cintia Bertacchi Uvo

Communications Engineering (2024)

The key role of sufficiency for low demand-based carbon neutrality and energy security across Europe

• Frauke Wiese
• Nicolas Taillard
• Yves Marignac

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.